Breech seal?

Benjamin Marauder Troubleshooting
Forum rules
MarauderAirRifle.com is not owned, Affiliated, or controlled by Crosman.
The Scope and goal of this section of the form is provide useful information 24/7 because I realize that most of us play with the toys on weekends when big companies and telephone support is not always available.

Normally if problems occur during this window you are SOL until the next business day (and your fun is over)

So if you are having problems check or search here to see if it is a known issue and what steps can be taken to resolve the issue.

If you ask questions on this forum, I can not guarantee Crosman support will see the post or reply to it, and you may need to give them a call at 800-724-7486 if you still need help or replacement parts.

Breech seal?

Postby dookie » Fri Aug 11, 2017 1:19 pm

Totally new to the Marauder...

I bought a used gun and while it shoots very well, I get a very slight puff of air on the back of my trigger hand when it fires. Thoughts?
dookie
 
Posts: 4
Joined: Mon Jul 17, 2017 6:52 am

Re: Breech seal?

Postby 22synrodn » Sat Aug 12, 2017 5:26 am

Replace transfer port and breech seals.
John 3:18

22 Synrod Unregulated. Tuned using JSB 18.13gr:
31 Shots @ 30.43 FPE, ES 1.60% (14 FPS)


25 Synrod Regulated. Tuned using JSB MKIIs 33.95gr:
32 Shots @ 51.57 FPE, ES 1.91% (16 FPS)
User avatar
22synrodn
 
Posts: 1074
Joined: Sat Jan 10, 2015 4:33 pm

Re: Breech seal?

Postby PB_Matrix » Sat Aug 12, 2017 10:45 am

There is a little bit of a breeze caused by the hammer flying forward, sounds like what you might be feeling.
PB_Matrix
 
Posts: 238
Joined: Thu Mar 20, 2014 4:23 am


Return to Marauder Problems and Solutions

Who is online

Users browsing this forum: No registered users and 1 guest