For Sale Marauder bullpup conversion kits

A place to list air gun related guns, parts, and Accessories.

For Sale Marauder bullpup conversion kits

Postby 412mkm » Thu Dec 22, 2011 4:18 pm

Marauder bullpup conversion kits. Everything needed to convert your Marauder to a bullpup, no modificatios to your gun.
$325 shipped U.S.
Image
Image
Image
Image
Image
Image
Thanks and Merry Christmas,
Brad
412mkm
 
Posts: 19
Joined: Sun Jul 31, 2011 12:36 pm

Re: For Sale Marauder bullpup conversion kits

Postby NeuRon » Thu Dec 22, 2011 7:31 pm

How much disassembly required to fit the scope mount and trigger mechanism, or is it just stock removal, connect linkage and drop in?

Is their an access hole to reach and operate the safety lever?

How many do you have, and is the raw wood the same price as the black coating?

Much appreciated!
Prod (tuned by Paul B., LW barrel, RB grips, ACE Folding stock, camo, TKO & JG brakes)
Sold: .22 Mrod "The Toad" (tuned by Paul B., 18" LW barrel, Toad-A-Flage camo)
Sold: .25 TT Mrod w/ reservoir and shroud extensions
User avatar
NeuRon
 
Posts: 2322
Joined: Thu Feb 10, 2011 12:27 pm

Re: For Sale Marauder bullpup conversion kits

Postby 412mkm » Thu Dec 22, 2011 8:14 pm

Yes there is an access hole for the safety, not shown on the first pic, oops had to go back and add it. Clearly seen in the larger stocks.
The wood on the truck bed coated stocks is birch ply, and on the plain wood is hard pine.
No mods to your gun just take off the stock and bolt on the scope bridge/trigger housing and drop it in.
Here is a pic of an older style, but should give you an idea.
Image
Price is the same for all three, and thats all there is for now.
Thanks,
Brad
412mkm
 
Posts: 19
Joined: Sun Jul 31, 2011 12:36 pm

Re: For Sale Marauder bullpup conversion kits

Postby NeuRon » Fri Dec 23, 2011 7:23 am

Is the one in the top pics the most recently built?
Prod (tuned by Paul B., LW barrel, RB grips, ACE Folding stock, camo, TKO & JG brakes)
Sold: .22 Mrod "The Toad" (tuned by Paul B., 18" LW barrel, Toad-A-Flage camo)
Sold: .25 TT Mrod w/ reservoir and shroud extensions
User avatar
NeuRon
 
Posts: 2322
Joined: Thu Feb 10, 2011 12:27 pm

Re: For Sale Marauder bullpup conversion kits

Postby 412mkm » Fri Dec 23, 2011 12:53 pm

This is the latest batch, but yes that one is the new style.
412mkm
 
Posts: 19
Joined: Sun Jul 31, 2011 12:36 pm

Re: For Sale Marauder bullpup conversion kits

Postby NeuRon » Sat Dec 24, 2011 5:17 am

Sorry for all of the questions:

I'm interested in the top one, just waiting for Christmas to be done. Also, I might be very interested in also buying an additional scope-mount for my other project, if you have one to sell by itself (or even with the trigger linkage included). It appears to be milled from solid aluminum. Could the design handle having the bottom 'ears' ground down a ways to clear my Teryx stock? Also, my tubes are coated and slightly larger than stock (talking a layer or two of spray-paint and a layer of hydrographic film). Can this mount accomodate that, or would the holes need to be enlarged to allow proper attachement? And does the mount use the shroud as a stressed mounting point... ...meaning, is tension applied to the shroud to secure it, or does it otherwise contact the shroud?

I do appreciate the replies, and thanks for coming back with products to sell! :D
Prod (tuned by Paul B., LW barrel, RB grips, ACE Folding stock, camo, TKO & JG brakes)
Sold: .22 Mrod "The Toad" (tuned by Paul B., 18" LW barrel, Toad-A-Flage camo)
Sold: .25 TT Mrod w/ reservoir and shroud extensions
User avatar
NeuRon
 
Posts: 2322
Joined: Thu Feb 10, 2011 12:27 pm

Re: For Sale Marauder bullpup conversion kits

Postby 412mkm » Sat Dec 24, 2011 5:50 am

The questions are ok, I understand.
The piece is 6061 aluminum. Its an 1.5" at the bottom. the trigger blade is .25", so there is some meat to be rounded off.
The airtube hole can be opened up with any style reamer, like you would with a brake hone.
Also the hole for the barrel is larger than the shroud so it leaves the barrel free floating.
Scope bridge and trigger linkage price is $150.

You can email me at [email protected] for more questions.
Thanks,
Brad
412mkm
 
Posts: 19
Joined: Sun Jul 31, 2011 12:36 pm

Re: For Sale Marauder bullpup conversion kits

Postby NeuRon » Sat Dec 24, 2011 6:17 am

I'll take it. Email sent.
Prod (tuned by Paul B., LW barrel, RB grips, ACE Folding stock, camo, TKO & JG brakes)
Sold: .22 Mrod "The Toad" (tuned by Paul B., 18" LW barrel, Toad-A-Flage camo)
Sold: .25 TT Mrod w/ reservoir and shroud extensions
User avatar
NeuRon
 
Posts: 2322
Joined: Thu Feb 10, 2011 12:27 pm

Re: For Sale Marauder bullpup conversion kits

Postby jdr724 » Thu Dec 29, 2011 6:02 pm

How about a picture of the bolt side with the rifle and magazine in the stock?

Thanks,
jdr724
 
Posts: 4
Joined: Mon Dec 26, 2011 12:04 pm

Re: For Sale Marauder bullpup conversion kits

Postby 412mkm » Fri Dec 30, 2011 4:54 pm

My persnal shooter, this should help.
Image
Image
412mkm
 
Posts: 19
Joined: Sun Jul 31, 2011 12:36 pm

Next

Return to Buy / Sell

Who is online

Users browsing this forum: No registered users and 2 guests