Well I got a second 25. m-rod to make into a bullpup.
I was going to have two of them, I had something in mind, but I may sell off the first one I made. But I am not sure yet, so any way.
I was half way into making the stock, made a wrong cut.
And my work is now fire wood lol.
Lucky I have two more pieces of wood to make a new one.
So got the stock make ok, but had to redo the stain over two times.
I added a tube extension & a shroud extension, with one extra baffle.
Then top her off with a BSA 6-24 scope.
And lastly tuned my gun using H&N 31.gr pellets & got this string.
829 ft/sec=47fpe
831 ft/sec=47fpe
836 ft/sec=48fpe
840 ft/sec=48fpe
839 ft/sec=48fpe
841 ft/sec=48fpe
851 ft/sec=49fpe
847 ft/sec=49fpe
--------------------- One clip
848 ft/sec=49fpe
855 ft/sec=50fpe
857 ft/sec=50fpe
857 ft/sec=50fpe
861 ft/sec=51fpe
863 ft/sec=51fpe
854 ft/sec=50fpe
853 ft/sec=50fpe
---------------------Two clips
853 ft/sec=50fpe
841 ft/sec=48fpe
844 ft/sec=48fpe
842 ft/sec=48fpe
837 ft/sec=48fpe
830 ft/sec=47fpe
825 ft/sec=46fpe
817 ft/sec=45fpe
Three clips 24 shots.
So here she is.